Page 1 of 1

Newbie question ^_^|||

Unread postPosted: April 6th, 2006, 9:51 am
by Jenia
I'v been playing Melty Blood for a long while now, but I still have no idea how to initiate blood heat. So far I'v only initiated the normal heat thing.
Any hints? :?

Unread postPosted: April 6th, 2006, 7:52 pm
by Message
Entering blood heat is quite simple: Activate heat mode when your magic circuit is at maximum (flashing gold). :-)

Unread postPosted: April 7th, 2006, 9:07 am
by Jenia
"Activate"? Activate how?
The only way I know to activate heat mode is to get magic circuit to maximum :?

Unread postPosted: April 7th, 2006, 1:14 pm
by Ciel
Down, down, down, shield would be the combination you look for.

Also if done when the magic circuit isn't in heat mode, it'll be activated, but won't let you go into blood heat that way.

Unread postPosted: April 7th, 2006, 5:33 pm
by Jenia
So THAT'S it!
Thanks!

Unread postPosted: April 26th, 2006, 12:37 pm
by Gunsheep
Wait.Plz ensure you have chosen PC-Mode when selecting the character.If you have chosen the AC-Mode(as I usually do),the Compel-To-Burst command(to active HEAT mode or B-HEAT while HEAT)is A+B+C

Personally I recommend the AC-Mode.Through shortcuts it enables you to active HEAT in a flash.It's very useful to recover form badly injurer and,when you are using chars with strong arc-drives,such as Satsuki,Wal,Shiki and Professor.Besides,you will not mistakely come to a heavy strike when you attempted a grasp.